|
|
|
|
|
General
Purpose Mandrels |
|
Zinc die
cast, with oilless bronze bushings, complete with 2-inch
SINGLE GROOVE V PULLEY. Painted shaft bearings.
Accurately machined 14-inch, 5/8-inch diameter Steel
Shaft and Flanges. Right hand thread on one end; left
hand thread on other end. A sturdy and useful mandrel
allowing an operation on each end without
changing. |
|
| Part
No. |
|
|
|
4840 |
- |
Turned down at both ends to 1/2-inch
diameter. |
| |
|
Takes Grinder, Buff, etc. with 1/2-inch
bore. |
|
4850 |
- |
Takes Grinder, Buff, etc. with 5/8-inch
bore. |
| |
|
|
| Zinc
die cast, with oilless bronze bushings, complete
with 2-inch SINGLE GROOVE V PULLEY. Painted shaft
bearings. Accurately machined 12-inch Steel Shaft
and Flanges. | |
|
| Part
No. |
|
|
|
4800 |
- |
Turned down at one end to
1/2-inch. |
| |
|
Takes saw with 1/2-inch
bore. |
|
4810 |
- |
Takes saw with 5/8-inch
bore. |
|
| |
|
| About Us |
Why
Alliance? | Technology
| Join Us | Feedback
| Contact Us
| Home | |
|
|
